Connect Printer and iPad for first time(for printer QL-820NWB)

To make the first time connection:

Connect printer with network

Step 1) Press the power button to turn on the printer. Make sure the green status light comes on.

Step 2) Press the [Menu] button to view the main menu.

Step 3) Use the [▲] and [▼] buttons to scroll and select WLAN > WLAN (On/Off) > On in the settings menu. Press [OK].

Step 4) Use the [▲] and [▼] buttons to select WLAN > Infra Manual Setting in your settings menu. Click [OK]. The printer will then search for available Wi-Fi networks.

Note: Your printer and iPad will need to be on the same SSID Wireless network.

Step 5) Using the [▲] and [▼] buttons, select your desired network and then click OK.

Step 6) Input your password following these steps: Looking at the top right of the screen, you can click [Menu] to change between inputting uppercase letters, lowercase letters, numbers and symbols. Then use the [▲] and [▼] buttons to select the correct characters.

If it has successfully connected, it will read “Connected!” Then press [OK].

If it reads that it did not connect, continue to repeat steps 9 through 11 until successful. STEP 7: To return to the main screen, click the [↩] button.

You should then see the Wi-Fi icon in the top right-hand corner.

Connect iPad with same pocket wifi network

Step 7) On your iPad, go to iPad "setting"

Step 8) Click "wifi", and ensure you are connected to the same pocket wifi network as Step 1-4

Connect iPad - Check in App with the printer

Step 9) Login to check in App, and click into the correct Event

Step 10) Click "Setting" icon on upper right hand corner.  Scroll down the menu bar and click "Select Printer" 

Step 11) Check if the printer is connecting to the correct pocket wifi, if yes, press "Next"

Step 12) Ensure it is choosing the correct printer, if yes, press "Next"

Step 13) Press "Print" and label should be printed on the printer you assigned

Video: https://www.youtube.com/watch?v=aNU7H8BD-qQ

Remarks:

1) If failure on step 11 or step 12, meaning the connection is not correctly done. Please start from Step 1 again to retry

2) If all the settings are correctly done from Step 1-12), and only the label cannot print out, check to ensure correct label size is used

3) The printer will only print if the screen is in homepage (not under any setting page)